Custom PC ET3113 polycarbonate (PC) virgin granules use for corrugated board, corrugated board, solid board, sheet, sheet
Realize environmental protection requirements with advanced technology and solve the shortcomings of water electroplating.
Color | Natural color | ||
Processing mode | Injection molding, extrusion molding | ||
Viscosity | High viscosity | ||
Material property | Transparent and light stable | ||
Use of materials | Corrugated board, corrugated board, solid board, sheet, sheet |
Flammability | Application of Flame from Small Burner - Method K and F (2.00 mm) | K1, F1 | DIN 53438-1, -3 | |
Burning Rate - US-FMVSS (> 1.00 mm) | passed | ISO 3795 | ||
Flash Ignition Temperature | 480 | °C | ASTM D1929 | |
Needle Flame Test | IEC 60695-11-5 | |||
Method F : 1.50 mm | 1 | min | IEC 60695-11-5 | |
Method F : 2.00 mm | 2 | min | IEC 60695-11-5 | |
Method F : 3.00 mm | 2 | min | IEC 60695-11-5 | |
Method K : 2.00 mm | 0.1 | min | IEC 60695-11-5 | |
Method K : 3.00 mm | 0.2 | min | IEC 60695-11-5 | |
Self Ignition Temperature | 550 | °C | ASTM D1929 | |
Supplementary information | ||||
Electrolytic Corrosion (23°C) | A1 | IEC 60426 | ||
ISO Shortname | ISO 7391-PC,EL,(,,)-09-9 | |||
Thin film | (23°C, 85% RH, 100 µm) Moisture permeability (23°C, 85% RH, 100 µm) | 15 | g/m²/24 hr | ISO 15106-1 |
Impact property | 7 Notched impact strength of simply supported beam 7 | ISO 7391 | ||
-30°C, complete fracture | 18 | kJ/m² | ISO 7391 | |
23°C, local fracture | 80 | kJ/m² | ISO 7391 | |
No notched impact strength of simply supported beams | ISO 179/1eU | |||
-60°C | No fracture | ISO 179/1eU | ||
-30°C | No fracture | ISO 179/1eU | ||
23°C | No fracture | ISO 179/1eU | ||
Notched impact strength of overhanging beam 8 | ISO 7391 | |||
-30°C, complete fracture | 20 | kJ/m² | ISO 7391 | |
23°C, local fracture | 70 | kJ/m² | ISO 7391 | |
Multi-axial instrumented impact energy | ISO 6603-2 | |||
-30°C | 70 | J | ISO 6603-2 | |
23°C | 60 | J | ISO 6603-2 | |
Multiaxial instrumentation peak impact force | ISO 6603-2 | |||
-30°C | 6500 | N | ISO 6603-2 | |
23°C | 5600 | N | ISO 6603-2 | |
Thermal performance | Thermal deformation temperature | |||
0.45MPa, not annealed | 141 | °C | ISO 75-2/B | |
1.8 MPa, not annealed | 128 | °C | ISO 75-2/A | |
9 Glass conversion temperature 9 | 148 | °C | ISO 11357-2 | |
Vica softening temperature | ||||
-- | 148 | °C | ISO 306/B50 | |
-- | 149 | °C | ISO 306/B120 | |
Ball Pressure Test (140°C) | Pass | IEC 60695-10-2 | ||
Linear coefficient of thermal expansion | ISO 11359-2 | |||
23-55°C Flow: 23 to 55°C | 6.5E-05 | cm/cm/°C | ISO 11359-2 | |
23-55°C Transverse: 23 to 55°C | 6.5E-05 | cm/cm/°C | ISO 11359-2 | |
-10(23°C) Thermal conductivity 10(23°C) | 0.2 | W/m/K | ISO 8302 | |
RTI Elec (1.50 mm) | 125 | °C | UL 746 | |
RTI Imp (1.50 mm) | 115 | °C | UL 746 | |
RTI (1.50 mm) | 125 | °C | UL 746 | |
Electrical performance | Surface resistivity | 1.0E+16 | ohms | IEC 60093 |
(23°C) Volume resistivity (23°C) | 1.0E+16 | ohms·cm | IEC 60093 | |
(23°C, 1.00 mm) Volume resistivity (23°C) | 34 | kV/mm | IEC 60243-1 | |
Relative capacitance | IEC 60250 | |||
23°C, 100 Hz | 3.1 | IEC 60250 | ||
23°C, 1 MHz | 3 | IEC 60250 | ||
Dissipation factor | IEC 60250 | |||
23°C, 100 Hz | 8.00E-04 | IEC 60250 | ||
23°C, 1 MHz | 0.01 | IEC 60250 | ||
Leakage trace index | IEC 60112 | |||
Solution A | 250 | V | IEC 60112 | |
Solution B | 125 | V | IEC 60112 | |
Flammability | UL flame retardant rating | UL 94 | ||
1.50 mm | HB | UL 94 | ||
0.750 mm | V-2 | UL 94 | ||
Flammability index of hot wire | IEC 60695-2-12 | |||
0.750 mm | 875 | °C | IEC 60695-2-12 | |
1.50 mm | 875 | °C | IEC 60695-2-12 | |
3.00 mm | 960 | °C | IEC 60695-2-12 | |
Hot filament ignition temperature | IEC 60695-2-13 | |||
0.750 mm | 875 | °C | IEC 60695-2-13 | |
1.50 mm | 875 | °C | IEC 60695-2-13 | |
3.00 mm | 900 | °C | IEC 60695-2-13 | |
11 Limiting oxygen index 11 | 28 | % | ISO 4589-2 | |
Optical property | 12 Refractive index 12 | 1.587 | ISO 489 | |
transmittance | ISO 13468-2 | |||
1000 µm | 89 | % | ISO 13468-2 | |
2000 µm | 89 | % | ISO 13468-2 | |
3000 µm | 88 | % | ISO 13468-2 | |
4000 µm | 87 | % | ISO 13468-2 | |
(3000 µm) Fog degree (3000 µm) | < 0.80 | % | ISO 14782 |
Zhejiang Houmi Import and Export Corporation was established in 2020 with a registered capital of 10 million yuan.
Relying on the company's more than 10 years of domestic trade and import experience, the establishment of HOUMI entrances and exports specifically targeted at the export business of plastic raw materials. The company's main business: PP PE PVC ABS PC POM PMMA PETG PS. Development brands: Sinopec, PetroChina, Shenhua, Secco, Sabic, Borouge, Yondellbasell, Qatar Petrochemical, sumitomo, Mitsubishi, Lottle, LG, Formosa Plastics, Chimei, etc. Suppliers of PC ET3113 polycarbonate (PC) virgin granules use for corrugated board, corrugated board, solid board, sheet, sheet in China. Our company adheres to the purpose of collaboration, innovation, reflects value, and win -win corporate tenets, and cooperates with employees to cooperate with partners to win a win -win situation with partners.
Disposable cups, lunch boxes, disposable forks, plastic bags, trash cans and so on.
view more +Disposable cups, lunch boxes, disposable forks, plastic bags, trash cans and so on.
view more +Disposable cups, lunch boxes, disposable forks, plastic bags, trash cans and so on.
view more +Disposable cups, lunch boxes, disposable forks, plastic bags, trash cans and so on.
view more +Provide you with the latest enterprise and industry news.
Polyformaldehyde POM granules, an engineering plastic widely used in plastic pro...
When you think of polyvinyl chloride PVC granules, the first thing that likely c...
High Impact Polystyrene (HIPS) granules are a popular and versatile plastic mate...
Processing PC (polycarbonate) granules into finished products involves several c...
In the world of plastics, polystyrene (PS) is a common player known for its vers...